順酐是一種重要的化工原料，在其生產過程中所產生的順酐廢水怎樣處理是化工廠所面臨的一個大問題。隨著工作的不斷推進，對順酐廢水處理工藝的研究也逐漸增多。例如如下一種處理順酐生產廢水的工藝，氫氧化鉀廠家來為您講解。

Maleic anhydride is an important chemical raw material. How to treat maleic anhydride wastewater produced in its production is a big problem faced by chemical plants. With the continuous advancement of environmental protection, the research on maleic anhydride wastewater treatment process has gradually increased. For example, the following process for treating maleic anhydride production wastewater will be explained by the potassium hydroxide manufacturer.

在順酐廢水處理工藝中，先將順酐廢水進入隔油池，去除廢水中上浮的大部分油類。然后將順酐廢水中加入強酸和異構劑，并使混合物在58-63℃下進行反應30-40分鐘后，將混合物進行降溫冷卻10-16℃后靜置15-18分鐘后，將混合物放入離心裝置內進行離心。

In the maleic anhydride wastewater treatment process, maleic anhydride wastewater is first sent to the oil separator to remove most of the oil floating in the wastewater. Then, strong acid and isomer are added to maleic anhydride wastewater, and the mixture is allowed to react at 58-63 ℃ for 30-40 minutes. Then, the mixture is cooled down to 10-16 ℃ and allowed to stand for 15-18 minutes. Then, the mixture is put into a centrifugal device for centrifugation.

再將離心后的反應物放置反應釜中，并向混合物中加入100℃的水，并對混合物進行攪拌后，將混合物升溫105-116℃下進行攪拌24-27分鐘后，向混合物中加入催化劑進行攪拌并過濾后，向混合物中再次加入催化劑進行攪拌并過濾后，將過濾物進行降溫結晶后離心分離，并將分離后的混合物放入烘干裝置內進行烘干干燥。

Then put the centrifuged reactant into the reaction kettle, add water at 100 ° C to the mixture, stir the mixture, raise the temperature of the mixture to 105-116 ° C, stir for 24-27 minutes, add catalyst to the mixture, stir and filter, add catalyst to the mixture again, stir and filter, lower the temperature of the filter, crystallize and centrifuge it, And put the separated mixture into a drying device for drying.

離心后的離心液中加入混凝劑，并使混合物在30-34℃下進行攪拌30-40分鐘，并控制溶液的pH為7-8，將混合放入過濾裝置內進行過濾，將過濾物放入離心萃取機內，并向混合物加入萃取劑進行反應

Add coagulant to the centrifugal liquid after centrifugation, stir the mixture at 30-34 ℃ for 30-40 minutes, and control the pH of the solution to 7-8. Put the mixture into the filter device for filtration, put the filter into the centrifugal extractor, and add extractant to the mixture for reaction

將反應后的離心萃取機下端的混合物放入在生物濾池內進行好氧發酵，并對混合物進行降解。反應后的離心萃取機上端的混合物中加入堿液進行混合后，并對混合物進行濃縮蒸餾，并對生成的混合物進行回收。

The mixture at the lower end of the centrifugal extractor after reaction is put into the biological filter for aerobic fermentation, and the mixture is degraded. After the reaction, alkali liquor is added to the mixture at the upper end of the centrifugal extractor for mixing, the mixture is concentrated and distilled, and the resulting mixture is recovered.

上述的順酐廢水處理思路可以幫助化工企業回收資源，具有較高的經濟效益。了解更多關于順酐相關知識，歡迎關注我們網站http://www.laiyanglicheng.com，為您提供產品的相關資訊以及材料。

The above maleic anhydride wastewater treatment ideas can help chemical enterprises recover resources and have high economic benefits. To learn more about maleic anhydride, please follow our website http://www.laiyanglicheng.com , to provide you with product related information and materials.